Measurement & Control of just about anything
Now supports Modbus Slave protocol!
If you need to control or monitor a device or system at a distance, the G3 is the solution. It comes complete with 8 x onboard I/O that allow you to connect to almost any device. Use it monitor or control pumps, valves, PLCs, dataloggers, rain gauges, tank levels, security systems, fire & evac systems, access control, irrigation systems, flow meters, emergency standby systems and more.
The G3 uses license free spread spectrum (900Mhz or 2.4Ghz), so you can get your remote monitoring or control application up and running fast.
For a limited time, we are offering the G3 system at a low introductory price. Please contact Maximation for more information
Suitable for all Industries!
- Factories
- Security Systems
- Mining
- Water & Wastewater
- Building Management
- Mobile plant & equipment
- Agriculture
- Aquaculture
- Transport monitoring
- Fire systems
- Race tracks
- Event management
- Emergency services and many more...
|
Download the brochure..click here
|
|
|
|
|
|
|
|
|
|
Multi Function display
|
Event logging
|
System status LEDs
|
Security enabled
|
Onboard wiring terminals
|
|
with navigation keys for easy on site display of values or diagnostics.
|
capture events as they happen with time/date stamping.
|
4 x Status LEDs report system status at a glance
|
Password protected menus and secure spread spectrum communications.
|
Removable socket design allows for easy wiring installation
|
|
|
|
|
|
|
|
Mini USB connector
|
Logic functions
|
Onboard I/O
|
Wireless comms
|
Free software utility
|
|
for programming via laptop/PC.
|
Inbuilt logic functions allow basic control of inputs and outputs/
|
Total of 8 x I/O allow you to connect to almost any device. (2 x AI, 2 x AO, 2 x DI, 2 x DO)
|
License free spread spectrum technology allows to connect to remote system with ease.
|
G3Manager allows you to setup the G3 using your Windows PC. Event logs can also be downloaded from the G3 for archiving.
|
4 Different operating modes to suit every application
|
|
Stand Alone Mode
Stand alone mode allows you to control a device locally using the inbuilt logic functions. In this mode the G3 functions as a small logic controller, allowing you to control devices / systems with event logging capability.
|
|
Back to Back Mode
Back to Back mode allows you to use the G3 as a wire replacement device. Ideal for when you need to monitor or control a device remotely, where cabling would prove too difficult or costly.
|
|
Remote I/O Mode
Remote I/O mode allows you to connect over 200 G3 devices to your Kingfisher Series II or III telemetry system. Perfect for when you need to monitor or control remote devices with your SCADA system.
|
|
Modbus Slave Mode
Firmware update for G3 now includes support for Modbus slave protocol. This allows the G3 to interface to a wider range of devices such as HMIs, PLCs, SCADA PCs, RTUs (Kingfisher and other brands). The Modbus master can communicate to the G3 using a stand-alone Maxstream Spread Spectrum modem.
 |
 |
|
Direct to SCADA PC using Modbus
|
Direct to Operator Display (HMI) using Modbus
|
 |
 |
|
Direct to PLC using Modbus
|
Direct to RTU (Kingfisher and other brands) using Modbus
|
|
|
|
| |
Product Specifications |
|
Processing
|
| uProcessor Type |
TI MSP430 (16-bit) |
| Memory Flash + RAM |
48KB+10KB |
|
Communications
|
| Wireless comms (optional) |
License-free frequency-hopping Spread Spectrum (900MHz & 2.4GHz) |
| Communications Strategy |
RBE (Report-By-Exception) & Polled. User configurable |
Transmit Power
(Spread Spectrum) |
900MHz - 1W
2.4GHz - 50mW |
Line of sight range
(Spread Spectrum) |
Subject to local conditions and antenna selection900MHz - up to 20 Miles / 32 Kms2.4GHz - up to 5 Miles / 8 Kms |
Reciever Sensitivity
(Spread Spectrum) |
900 MHz -110 dBm 2.4 GHz -105 dBm |
Frequency
(Spread Spectrum) |
900 US/CAN: ISM 902 - 928 MHz900 AU: ISM 915 - 928 MHz
2.4: ISM 2.4000 - 2.4835 GHz |
| Data rate (Spread Spectrum) |
Normal 9600bps. High Speed Mode 115K/bps |
| |
|
I/O Capability
|
| Analog Inputs |
Two 0-20mA or 4-20mA inputs. 12 bit resolution. Terminating resistance: 100Ω. Input inpedance 250Ω.
Over current and over voltage protected. Surge and transient protected |
| Analog Outputs |
Two 0-20mA or 4-20mA outputs. 12 bit resolution. Maximum load 1275Ω@30V
Designed for field voltages of 9V to 30V. Over and reverse voltage protected. Surge and transient protected |
| Discrete Inputs |
Two inputs accepting levels up to 24V, with a low to high threshold of approx 2.5V. Surge and transient protected |
| Discrete Outputs |
Two open collector outputs, switch voltages of up to 30V to ground.
Switched supply voltage is available for driving inputs and outputs. Surge and transient protected |
| I/O Failsafe |
Yes. Programmable failsafe setpoints on all Analog and Digital outputs |
| |
|
|
Onboard Display
|
| Onboard display |
96 x 64 pixel OLED with navigation keysShows status, I/O values, configuration details, etc |
| Status LEDs |
4 x Status LEDs. Power, Scan, Comms, and Error |
| Control mode |
Yes, user can toggle/change inputs and outputs via front keypad for testing purposes |
| |
|
|
Power
|
| Supply Voltage |
9 to 30V DC, nominally 12V or 24V.Fuse protected (1A resettable). Over and reverse voltage protected. Input voltage is monitored |
| Supply Current (@12 Vdc) |
Up to 400mA TX On, 20mA operating, <5mA in sleep mode |
| Output power |
Supply voltage up to 200mA |
| |
|
General
|
| Programming port |
Mini USB 2.0 port for configuration and diagnostics. ESD protected to 20kV |
| Operating modes |
Stand alone, Back to Back, Remote I/O (maximum 249 devices per SCADA host) |
| Real Time Clock (RTC) |
Yes, onboard realtime clock |
| Security |
Password protected menus, encrypted communications and configurable Network ID |
| Event logging |
Last 1000 events with time and date stamping |
| Counters |
2 x General purpose 32 bit counters with programmable events for use in functions |
| |
|
Programming
|
| Programming Software |
Kingfisher G3Manager configuration and programming software |
| Environment |
| Environmental |
-40oC to +70oC (-20oC to +70oC for OLED display) |
| Relative Humidity |
5 - 95% Non-condensing |
| Approvals |
FCC, CE, C tick |
Products 
Recommend 
