Features:
CP-xx (CP-10, CP-11, CP-21) processor modules provide all processing, I/O scanning, logic, control and communications functions required in any of the RTU configurations that may be adopted. The processor module has up to three independent communications ports. Ports 2 and 3 can use plug-in option boards while port 1 is fixed as RS232C.
RTUs may have up to 2 CP-11 modules that can serve up to four backplanes in a hot standby configuration (note one processor should be in an odd numbered backplane slot and the other in an even numbered backplane slot). One processor controls I/O module scanning and communications while the other redundant processor listens. The redundant processor module will take control under the following conditions:
The CP-10/11 has 1MB of flash memory for the storage of all operating code and selected system parameters, and 1MB of battery backed static RAM for all configuration and event storage data.
The CP-21 has 1MB of flash memory for the storage of all operating code and selected system parameters, and 2MB of battery backed static RAM for all configuration and event storage data. The CP-21 is also loaded with an ethernet driver chip that allows use of an ethernet option board on port 2 only.
- Processor module for Series II RTUs
- Redundancy feature allows standby processors for mission critical applications (CP-10/11)
- Up to 3 Comms Ports allows a multitude of devices
- Advanced Intel CPU, 25MHz
- 1MB RAM (CP-10/11), 2 MB RAM (CP-21)
- CP-11-xx (Central Processor Module c/w 1024kB RAM (448kB avail) 1xRS232 port + 2 x option ports)
- CP-21-xx (Central Processor Module c/w 2048kB RAM (1344kB avail) 1xRS232 port + 2 x option ports)
Note: xx denotes that the?processor module can be delivered with up to 2 option boards preloaded at time of shipping. Please advise your Kingfisher dealer if you require any option boards preloaded.
Example: CP-11-IJ
CP-11 fitted with Option I (Isolated serial) and Option J (Image Capture)
|
Product specifications: |
|
General
|
| |
CP11
|
CP21
|
| Processor |
Intel 80C386EX |
| Word Size |
32 Bit internal data bus
16 Bit external data bus |
| Clock Speed |
Selectable 16-33MHz (Default 25MHz) |
| BIOS |
|
| FLASH RAM |
1MB total
64K for drivers (CP-10/11)
|
| Static CMOS RAM |
1MB (CP-10/11)
|
2MB (CP-21)
|
| Realtime clock |
Y. Accuracy + 1 minute/month |
| Watchdog timer |
Y |
| Status Indication |
Y |
| Battery Life - module unpowered |
10 Years (CP-10/11)
|
7 Years (CP-21)
|
| Communication Ports |
1-3 |
| Comm Port 1 |
(RS232) 300 to 115200 Baud |
| Comm Port 2 |
(optional) Not fitted, RS232 only, RS232/RS485/RS422, PSTN, PLINE, Radio, Video, Hart, Fibre Optic, Ethernet and more |
Comm Port 3 |
(optional) Not fitted, RS232 only, RS232/RS485/RS422, PSTN, PLINE, Radio, Video, Hart or Fibre Optic and more |
| Configuration Software |
Toolbox |
| Diagnostics Software |
Y |
| Complex Configuration |
Toolbox |
| RTU Address Range |
1 - 249 (expandable to 2000 by using multiple masters) |
| Communications Protocol |
Kingfisher, Modbus + many more |
| Analog Block Processing |
Y |
| PID Block Processing |
Y |
| Logic Processing |
Ladder |
| CPUs per RTU |
1 or 2 |
| Internal Power Consumption |
275mA from +5VDC bus on backplane |
| I/O Bus Data Rate |
250 KBit/s |
| CM Bus Data Rate |
83 KBit/s |
|
Environmental
|
| Operating Temperature |
-20C to 70C / -4F to 158F |
| Storage Temperature |
-40C to 85C / -40F to 185F |
| Operating Humidity |
5 to 98% RH non-condensing |
Products 
Recommend 