Login
 
Home arrow Products arrow Kingfisher Series IIarrow Communication options
 
Option I - Isolated Serial

Features:

The isolated serial option board (I) provides an RS232C, RS485 or an RS422 serial interface. The port is software configurable for any of these modes.

RS485 requires a 120-Ohm terminating resistor at each end of the transmission line and RS422 requires a 100-Ohm terminating resistor at the receiver end of the transmission line only.

{jgtabber} [tab ==Overview==]
  • Isolated Serial Port option board
  • Software configurable for RS232, RS485, RS422
  • Fits CP-10, CP-11, CP-21, CP-30,?MC-10, MC-11, LP-1[/tab] [tab ==Ordering Information==]
  • COMMS-OPTION-I (ISOLATED RS232/422/485 for CP-11/CP-21/MC-11, option port 2/3)[/tab]

Product specifications:
General
   
Baudrate 300 - 115200 bp/s
Configuration Software Toolbox
Internal Power Consumption 15mA from +5VDC Bus on backplane
RS422 Line drive 10 Receivers
RS485 Line drive 32 Receivers
Communications No parity bit, 8 data bits, 1 stop bit
Isolation 2.5 kV
   
Environmental
   
Operating Temperature -20C to 70C / -4F to 158F
Storage Temperature -40C to 85C / -40F to 185F
Operating Humidity 5 to 98% RH non-condensing

 

Recommend Print Datasheet


Last updated: 2007-05-07 22:54:39